Description

Formulated for the removal of stains caused by the growth of mold on leather exposed to high humidity, moisture, or dampness. If identified early, Mold Remover eliminates surface stains, inhibits further growth, and restores leather to its original condition. Surface mold appears as dark green spots and is usually combined with an offensive odor. This type of stain occurs most often in tropical or other highly humid climates, when water has been absorbed, or when leather has been stored in plastic for extended periods of time. Mold Remover is a specialized product that readily resolves problems of mold.

Pre-Test: Use protective gloves during application and avoid contact with eyes or skin. Apply to a hidden area. If there is color change, color loss, or darkening, do not use.

Package for Professional users. See technical information for use.

Directions: Dampen a soft cloth with Mold Remover and gently rub the area to be treated. Repeat this procedure after 24 hours if necessary. If the mold has been present for a long time, it may be necessary to re-color the leather. Clean with Leather Cleaner to remove any trace of residue left by Mold Remover. Apply Leather Protector with a cloth and wipe gently in circular motions.

Note: Do not use Mold Remover on nubuck leather. For nubuck leather, rub with a dry Reviving Sponge.

Warning:  Causes serious eye irritation. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Read label before use. Wash hands thoroughly after handling. Wear protective gloves and eye protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Dispose of contents/container in accordance with applicable regulations. Do not swallow. EUH208 Contains Chlorocresol. May produce an allergic reaction. Contains (Regulation (EC) No 648/2004) less than 5% non-ionic surfactants. Preservatives: Chlorocresol. Perfumes. Contains a preservative to control microbial deterioration.

UFI: GEF1-P0KC-J007-KUSQ

MADE IN ITALY

INCI: available on fenice.it

This post is also available in: Italian