Furniture cleaning

Expert tips for the proper maintenance of your leather.

Cleaning leather sofas

Select the type of issue to be solved from the menu to find advice from Fenice experts and products most suited to the task.

  1. Clean with our Leather Cleaner and the white side of our dual-action sponge. Eliminate any residual dirt with water using the blue side of the dual-action sponge.
  2. Spray Leather & Textile Degreaser only on the greasy area. Let rest for at least four hours.
  3. Vacuum up the powder, then remove any remaining residue with a dry sponge. If the grease is not completely removed, repeat step 2.
  4. Clean again with our Leather Cleaner and the blue side of our dual-action sponge.
  5. Apply Leather Protector and dry

  1. Apply the Ink Remover in circular motions to the stain and wait about 30 seconds.When the stain starts to break up, wipe away both the Ink Remover and the stain using a soft, white cloth.
  2. Clean with Leather Cleaner and the Dual-Action Sponge.
  3. If the stain has not been fully removed, repeat steps 1 and 2 once without rubbing too hard. Ink can be removed when acting within a few hours. Otherwise, do what you can to minimize the stain, then call for expert intervention.
  4. Rinse with water and dry.
  5. Apply Leather Protector with a soft, white cloth and let dry.

  1. Clean with our Leather Cleaner and the white side of our dual-action sponge.
  2. Eliminate any residual dirt with water using the blue side of the dual-action sponge.
  3. Apply Mold Remover to a cloth and delicately rub the area to be treated.
  4. Repeat after 24 hours if necessary.
  5. Clean again using Leather Cleaner and the blue side of the dual-action sponge to remove any residue of Mold Remover.
  6. Apply Leather Protector with a cloth and rub lightly in circular motions.
Let dry, then lightly buff if desired.

  1. Clean the leather with our Delicate Cleaner and the white side of our dual-action sponge. Eliminate any residual dirt with water using the blue side of the dual-action sponge. Dry
  2. Apply Spew Remover to a cloth and delicately rub the area to be treated.
  3. Refresh the cloth frequently and always use a clean section of the cloth.
  4. Warm the area with a heat source to help the product penetrate into the leather.
  5. Let rest for 24 hours, then repeat the process if necessary.
  6. Apply Leather Protector with a cloth and rub lightly in circular motions.
  7. Let dry, then lightly buff if desired

  1. Clean the leather with our Leather Cleaner and the white side of our dual-action sponge. Eliminate any residual dirt with water using the blue side of the dual-action sponge.

  2. Let air dry

  3. Apply Anti-Squeak

  4. Let air dry

  1. Clean the leather with our Leather Cleaner and the white side of our dual-action sponge. Eliminate any residual dirt with water using the blue side of the dual-action sponge.
  2. Let air dry
  3. Apply Leather Revive
  4. Let air dry and buff with a cloth if desired

  1. Clean the leather with our Leather Cleaner and the white side of our dual-action sponge. Eliminate any residual dirt with water using the blue side of the dual-action sponge. Dry

  2. Apply Leather Protector and dry

Cleaning leather sofas

Select the type of issue to be solved from the menu to find advice from Fenice experts and products most suited to the task.

  1. Clean with our Leather Cleaner and the white side of our dual-action sponge. Eliminate any residual dirt with water using the blue side of the dual-action sponge.
  2. Spray Leather & Textile Degreaser only on the greasy area. Let rest for at least four hours.
  3. Vacuum up the powder, then remove any remaining residue with a dry sponge. If the grease is not completely removed, repeat step 2.
  4. Clean again with our Leather Cleaner and the blue side of our dual-action sponge.
  5. Apply Leather Protector and dry

  1. Apply the Ink Remover in circular motions to the stain and wait about 30 seconds.When the stain starts to break up, wipe away both the Ink Remover and the stain using a soft, white cloth.
  2. Clean with Leather Cleaner and the Dual-Action Sponge.
  3. If the stain has not been fully removed, repeat steps 1 and 2 once without rubbing too hard. Ink can be removed when acting within a few hours. Otherwise, do what you can to minimize the stain, then call for expert intervention.
  4. Rinse with water and dry.
  5. Apply Leather Protector with a soft, white cloth and let dry.

  1. Clean with our Leather Cleaner and the white side of our dual-action sponge.
  2. Eliminate any residual dirt with water using the blue side of the dual-action sponge.
  3. Apply Mold Remover to a cloth and delicately rub the area to be treated.
  4. Repeat after 24 hours if necessary.
  5. Clean again using Leather Cleaner and the blue side of the dual-action sponge to remove any residue of Mold Remover.
  6. Apply Leather Protector with a cloth and rub lightly in circular motions.
Let dry, then lightly buff if desired.

  1. Clean the leather with our Delicate Cleaner and the white side of our dual-action sponge. Eliminate any residual dirt with water using the blue side of the dual-action sponge. Dry
  2. Apply Spew Remover to a cloth and delicately rub the area to be treated.
  3. Refresh the cloth frequently and always use a clean section of the cloth.
  4. Warm the area with a heat source to help the product penetrate into the leather.
  5. Let rest for 24 hours, then repeat the process if necessary.
  6. Apply Leather Protector with a cloth and rub lightly in circular motions.
  7. Let dry, then lightly buff if desired

  1. Clean the leather with our Leather Cleaner and the white side of our dual-action sponge. Eliminate any residual dirt with water using the blue side of the dual-action sponge.

  2. Let air dry

  3. Apply Anti-Squeak

  4. Let air dry

  1. Clean the leather with our Leather Cleaner and the white side of our dual-action sponge. Eliminate any residual dirt with water using the blue side of the dual-action sponge.
  2. Let air dry
  3. Apply Leather Revive
  4. Let air dry and buff with a cloth if desired

  1. Clean the leather with our Leather Cleaner and the white side of our dual-action sponge. Eliminate any residual dirt with water using the blue side of the dual-action sponge. Dry

  2. Apply Leather Protector and dry

Contact us

For whatever you may need, simply send an email to info@fenice.care
or use the form below

    Contact us

    For whatever you may need, simply send an email to info@fenice.care
    or use the form below

      This post is also available in: Italian