Seat repair
Select the type of issue to be solved from the menu to find advice from Fenice experts and products most suited to the task.
Seat repair
For seats that are stained, scratched or otherwise damaged or worn, Fenice technology ensures excellent results in all types of repairs and cleaning. Also for steering wheels, dashboards, and all plastic parts inside the car.
These are all water-based products developed with the latest technologies actually being used by tanneries. When used correctly, these “OEM” products make it possible to carry out repairs that make leather as resistant, compact and durable as when it was new.
Surface abrasion
- Use our Ultra Rapid Leather Cleaner
- Rinse with water and dry
- Apply Leather Glue WB, then let dry
If the repair isn’t satisfactory, proceed as follows:
- Apply multiple layers of Surface Repair
- Use Grain Copier on an area where the grain of the leather is well defined to copy it. Leave to dry for a few minutes.
- Warm the copy of the grain until you see a change in color. Immediately place the copy over the scratch and press down for 10 seconds. Let cool for 20 seconds before removing from the leather.
- Mix the colors and adjust the percentages as necessary in order to achieve the desired color. Add Dulling Agent at a ratio of no more than 1:1 to get the right degree of shine.
- Apply Touch-up to the area and let dry
- Apply Car Leather Protector and dry
Hole, cigarette burns
- Use our Ultra Rapid Leather Cleaner
- Rinse with water and dry
- Glue the Support Mesh beneath the hole using Leather Glue WB and let dry
- Fill most of the hole with a layer of Heat Repair and dry with a professional drier. Apply with a second layer until the hole is completely covered, but do not let dry.
- Apply Grain Copier onto an area where the grain of the leather is well defined to copy it. Leave to dry for a few minutes.
- Place the copy of the grain onto the second layer of Heat Repair. Place the Heat Paper Repair over the copy of the grain. Heat with the iron for 30 seconds in slow, circular motions and applying a slight pressure. Let cool for 1 minute
- Mix the colors and adjust the percentages as necessary in order to achieve the desired color. Add Dulling Agent at a ratio of no more than 1:1 to get the right degree of shine. Test the color on a hidden area
- Apply the Touch-up with a soft cloth, then dry
- Apply Car Leather Protector and dry
Deep cracks
- Clean with the Power Cleaner diluted in 5-8 parts water
- Clean deeply with Deep Cleaner F
- Fill the crack with the Mender and leave to air dry for at least 4 hours
- When the product is completely dry, sand with 400 Sand Paper
- Remove the powdery residue with a damp cloth
- Spray a thin layer of Extra Adhesion onto the entire area to be treated
- Add 5% Color Bonder to the Basecoat Color and spray onto the entire surface to be treated, then dry thoroughly with an electric drier.
- Spray Top Coat Gloss or Matte, depending on the amount of shine desired. To get the right texture and aroma, add either the Slip or Non-Slip feel modifier (FM), Eco-crosslinker, and the Leather Fragrance, then dry well.
Mold
- Clean with our Ultra Rapid Leather Cleaner and let dry
- Apply Mold Remover to a cloth and delicately rub the area to be treated.
- Repeat after 24 hours if necessary.
- Clean again using Ultra Rapid Leather Cleaner to remove any residue of Mold Remover.
- Apply Car Leather Protector with a cloth and rub lightly in circular motions.
- Let dry, then lightly buff if desired.
If the finish is damaged, execute the following steps:
- Clean deeply with Deep Cleaner F
- Spray a thin layer of Extra Adhesion onto the entire area to be treated, then dry
- Add 5% Color Bonder to the Basecoat Color and spray onto the entire surface to be treated, then dry thoroughly with an electric drier.
- Spray Top Coat Gloss or Matte, depending on the amount of shine desired. To get the right texture and aroma, add either the Slip or Non-Slip feel modifier (FM), Eco-crosslinker, and the Leather Fragrance. Dry well.
Squeaky or dry, stiff leather
- Clean with the Ultra Rapid Leather Cleaner diluted in 5-8 parts water
- Rinse with Leather Cleaner
- Apply Leather Revive
- Let air dry and buff with a cloth if desired
Spew
- Clean with our Ultra Rapid Leather Cleaner and let dry
- Apply Spew Remover to a cloth and delicately rub the area to be treated.
- Refresh the cloth frequently and always use a clean section of the cloth.
- Let rest for 24 hours, then repeat the process if necessary.
- Apply Car Leather Protector with a cloth and rub lightly in circular motions.
- Let dry, then lightly buff if desired.
Discoloration
- Clean with our Leather Cleaner
- Clean deeply with Deep Cleaner F
- Spray a thin layer of Extra Adhesion onto the entire area to be treated, then dry
- Add 5% Color Bonder to the Basecoat Color and spray onto the entire surface to be treated, then dry thoroughly with an electric drier.
- Spray Top Coat Gloss or Matte, depending on the amount of shine desired. To get the right texture and aroma, add either the Slip or Non-Slip feel modifier (FM), Eco-crosslinker, and the Leather Fragrance. Dry well.
Scratches
- Use our Ultra Rapid Leather Cleaner
- Rinse with water and dry
- Apply Leather Glue WB, then let dry
- Apply Car Leather Protector and dry
If the repair isn’t satisfactory, proceed as follows:
- Apply multiple layers of Surface Repair
- Use Grain Copier on an area where the grain of the leather is well defined to copy it. Leave to dry for a few minutes.
- Warm the copy of the grain until you see a change in color. Immediately place the copy over the scratch and press down for 10 seconds. Let cool for 20 seconds before removing from the leather.
- Mix the colors and adjust the percentages as necessary in order to achieve the desired color. Add Dulling Agent at a ratio of no more than 1:1 to get the right degree of shine.
- Apply Touch-up to the area and let dry
- Apply Car Leather Protector and dry
Seat repair
For seats that are stained, scratched or otherwise damaged or worn, Fenice technology ensures excellent results in all types of repairs and cleaning. Also for steering wheels, dashboards, and all plastic parts inside the car.
These are all water-based products developed with the latest technologies actually being used by tanneries. When used correctly, these “OEM” products make it possible to carry out repairs that make leather as resistant, compact and durable as when it was new.
Surface abrasion
- Use our Ultra Rapid Leather Cleaner
- Rinse with water and dry
- Apply Leather Glue WB, then let dry
If the repair isn’t satisfactory, proceed as follows:
- Apply multiple layers of Surface Repair
- Use Grain Copier on an area where the grain of the leather is well defined to copy it. Leave to dry for a few minutes.
- Warm the copy of the grain until you see a change in color. Immediately place the copy over the scratch and press down for 10 seconds. Let cool for 20 seconds before removing from the leather.
- Mix the colors and adjust the percentages as necessary in order to achieve the desired color. Add Dulling Agent at a ratio of no more than 1:1 to get the right degree of shine.
- Apply Touch-up to the area and let dry
- Apply Car Leather Protector and dry
Hole, cigarette burns
- Use our Ultra Rapid Leather Cleaner
- Rinse with water and dry
- Glue the Support Mesh beneath the hole using Leather Glue WB and let dry
- Fill most of the hole with a layer of Heat Repair and dry with a professional drier. Apply with a second layer until the hole is completely covered, but do not let dry.
- Apply Grain Copier onto an area where the grain of the leather is well defined to copy it. Leave to dry for a few minutes.
- Place the copy of the grain onto the second layer of Heat Repair. Place the Heat Paper Repair over the copy of the grain. Heat with the iron for 30 seconds in slow, circular motions and applying a slight pressure. Let cool for 1 minute
- Mix the colors and adjust the percentages as necessary in order to achieve the desired color. Add Dulling Agent at a ratio of no more than 1:1 to get the right degree of shine. Test the color on a hidden area
- Apply the Touch-up with a soft cloth, then dry
- Apply Car Leather Protector and dry
Deep cracks
- Clean with the Power Cleaner diluted in 5-8 parts water
- Clean deeply with Deep Cleaner F
- Fill the crack with the Mender and leave to air dry for at least 4 hours
- When the product is completely dry, sand with 400 Sand Paper
- Remove the powdery residue with a damp cloth
- Spray a thin layer of Extra Adhesion onto the entire area to be treated
- Add 5% Color Bonder to the Basecoat Color and spray onto the entire surface to be treated, then dry thoroughly with an electric drier.
- Spray Top Coat Gloss or Matte, depending on the amount of shine desired. To get the right texture and aroma, add either the Slip or Non-Slip feel modifier (FM), Eco-crosslinker, and the Leather Fragrance, then dry well.
Mold
- Clean with our Ultra Rapid Leather Cleaner and let dry
- Apply Mold Remover to a cloth and delicately rub the area to be treated.
- Repeat after 24 hours if necessary.
- Clean again using Ultra Rapid Leather Cleaner to remove any residue of Mold Remover.
- Apply Car Leather Protector with a cloth and rub lightly in circular motions.
- Let dry, then lightly buff if desired.
If the finish is damaged, execute the following steps:
- Clean deeply with Deep Cleaner F
- Spray a thin layer of Extra Adhesion onto the entire area to be treated, then dry
- Add 5% Color Bonder to the Basecoat Color and spray onto the entire surface to be treated, then dry thoroughly with an electric drier.
- Spray Top Coat Gloss or Matte, depending on the amount of shine desired. To get the right texture and aroma, add either the Slip or Non-Slip feel modifier (FM), Eco-crosslinker, and the Leather Fragrance. Dry well.
Squeaky or dry, stiff leather
- Clean with the Ultra Rapid Leather Cleaner diluted in 5-8 parts water
- Rinse with Leather Cleaner
- Apply Leather Revive
- Let air dry and buff with a cloth if desired
Spew
- Clean with our Ultra Rapid Leather Cleaner and let dry
- Apply Spew Remover to a cloth and delicately rub the area to be treated.
- Refresh the cloth frequently and always use a clean section of the cloth.
- Let rest for 24 hours, then repeat the process if necessary.
- Apply Car Leather Protector with a cloth and rub lightly in circular motions.
- Let dry, then lightly buff if desired.
Discoloration
- Clean with our Leather Cleaner
- Clean deeply with Deep Cleaner F
- Spray a thin layer of Extra Adhesion onto the entire area to be treated, then dry
- Add 5% Color Bonder to the Basecoat Color and spray onto the entire surface to be treated, then dry thoroughly with an electric drier.
- Spray Top Coat Gloss or Matte, depending on the amount of shine desired. To get the right texture and aroma, add either the Slip or Non-Slip feel modifier (FM), Eco-crosslinker, and the Leather Fragrance. Dry well.
Scratches
- Use our Ultra Rapid Leather Cleaner
- Rinse with water and dry
- Apply Leather Glue WB, then let dry
- Apply Car Leather Protector and dry
If the repair isn’t satisfactory, proceed as follows:
- Apply multiple layers of Surface Repair
- Use Grain Copier on an area where the grain of the leather is well defined to copy it. Leave to dry for a few minutes.
- Warm the copy of the grain until you see a change in color. Immediately place the copy over the scratch and press down for 10 seconds. Let cool for 20 seconds before removing from the leather.
- Mix the colors and adjust the percentages as necessary in order to achieve the desired color. Add Dulling Agent at a ratio of no more than 1:1 to get the right degree of shine.
- Apply Touch-up to the area and let dry
- Apply Car Leather Protector and dry
Contact us
For whatever you may need, simply send an email to info@fenice.care
or use the form below
Contact us
For whatever you may need, simply send an email to info@fenice.care
or use the form below
This post is also available in: Italian
Fenice S.p.A.
Via del Lavoro, 1 | 36078 Valdagno (Vicenza) | Italy
R.E.A. 146564/Vi – C.F. e reg. imp. Vicenza P.IVAIT00688890243 – c.s. €3.150.000,00 i.v.
Tel. +39 0445.425500 – www.fenice.care – info@fenice.care
Scheda dati di sicurezza / Safety Data Sheet: regulatory@fenice.it
