Cleaning leather sofas
Find out how to remove accidental stains from your leather furnishings.
MAXI LEATHER CARE KIT WITH INK REMOVER
All you need to give your living room 3 complete cleaning and protection cycles. Comes with a handy ink and chocolate stain remover.
Specific for pigmented leather.
MAXI LEATHER CARE KIT WITH INK REMOVER
All you need to give your living room 3 complete cleaning and protection cycles. Comes with a handy ink and chocolate stain remover.
Specific for pigmented leather.
Cleaning leather sofas
Read about the steps to be taken,
follow the advice of Fenice experts, and find out which products to use.
Grease - Oil
-
Clean with our Leather Cleaner and the white side of our dual-action sponge. Eliminate any residual dirt with water using the blue side of the dual-action sponge.
-
Apply our Powder Degreaser only on the greasy area. Let rest for at least four hours.
-
Vacuum up the powder, then remove any remaining residue with a dry sponge. If the grease is not completely removed, repeat step 2.
-
Clean again with our Leather Cleaner and the blue side of our dual-action sponge.
-
Apply Leather Protector and dry
Ink marks
-
Apply the Ink Remover in circular motions to the stain and wait about 30 seconds.
-
When the stain starts to break up, wipe away both the Ink Remover and the stain using a soft, white cloth.
-
Clean with Leather Cleaner and the Dual-Action Sponge. If the stain has not been fully removed, repeat steps 1 and 2 once without rubbing too hard. Ink can be removed when acting within a few hours. Otherwise, do what you can to minimize the stain, then call for expert intervention.
-
Rinse with water and dry.
-
Apply Leather Protector with a soft, white cloth and let dry.
Mold
-
Clean with our Leather Cleaner and the white side of our dual-action sponge. Eliminate any residual dirt with water using the blue side of the dual-action sponge.
-
Apply Mold Remover to a cloth and delicately rub the area to be treated.
-
Repeat after 24 hours if necessary.
-
Clean again using Leather Cleaner and the blue side of the dual-action sponge to remove any residue of Mold Remover.
-
Apply Leather Protector with a cloth and rub lightly in circular motions.
-
Let dry, then lightly buff if desired.
Squeaky leather
-
Clean the leather with our Leather Cleaner and the white side of our dual-action sponge. Eliminate any residual dirt with water using the blue side of the dual-action sponge.
-
Let air dry
-
Apply Anti-Squeak
-
Let air dry
Dry, stiff leather
- Clean the leather with our Leather Cleaner and the white side of our dual-action sponge. Eliminate any residual dirt with water using the blue side of the dual-action sponge.
- Let air dry
- Apply Leather Revive
- Let air dry and buff with a cloth if desired
Dirt & soiling
-
Clean the leather with our Leather Cleaner and the white side of our dual-action sponge. Eliminate any residual dirt with water using the blue side of the dual-action sponge. Dry
-
Apply Leather Protector and dry
Cleaning leather sofas
Read about the steps to be taken,
follow the advice of Fenice experts, and find out which products to use.
Grease - Oil
-
Clean with our Leather Cleaner and the white side of our dual-action sponge. Eliminate any residual dirt with water using the blue side of the dual-action sponge.
-
Apply our Powder Degreaser only on the greasy area. Let rest for at least four hours.
-
Vacuum up the powder, then remove any remaining residue with a dry sponge. If the grease is not completely removed, repeat step 2.
-
Clean again with our Leather Cleaner and the blue side of our dual-action sponge.
-
Apply Leather Protector and dry
Ink marks
-
Apply the Ink Remover in circular motions to the stain and wait about 30 seconds.
-
When the stain starts to break up, wipe away both the Ink Remover and the stain using a soft, white cloth.
-
Clean with Leather Cleaner and the Dual-Action Sponge. If the stain has not been fully removed, repeat steps 1 and 2 once without rubbing too hard. Ink can be removed when acting within a few hours. Otherwise, do what you can to minimize the stain, then call for expert intervention.
-
Rinse with water and dry.
-
Apply Leather Protector with a soft, white cloth and let dry.
Mold
-
Clean with our Leather Cleaner and the white side of our dual-action sponge. Eliminate any residual dirt with water using the blue side of the dual-action sponge.
-
Apply Mold Remover to a cloth and delicately rub the area to be treated.
-
Repeat after 24 hours if necessary.
-
Clean again using Leather Cleaner and the blue side of the dual-action sponge to remove any residue of Mold Remover.
-
Apply Leather Protector with a cloth and rub lightly in circular motions.
-
Let dry, then lightly buff if desired.
Squeaky leather
-
Clean the leather with our Leather Cleaner and the white side of our dual-action sponge. Eliminate any residual dirt with water using the blue side of the dual-action sponge.
-
Let air dry
-
Apply Anti-Squeak
-
Let air dry
Dry, stiff leather
- Clean the leather with our Leather Cleaner and the white side of our dual-action sponge. Eliminate any residual dirt with water using the blue side of the dual-action sponge.
- Let air dry
- Apply Leather Revive
- Let air dry and buff with a cloth if desired
Dirt & soiling
-
Clean the leather with our Leather Cleaner and the white side of our dual-action sponge. Eliminate any residual dirt with water using the blue side of the dual-action sponge. Dry
-
Apply Leather Protector and dry
Contact us
For whatever you may need, simply send an email to info@fenice.care
or use the form below.
Contact us
For whatever you may need, simply send an email to info@fenice.care
or use the form below.
Fenice Care System S.p.A. Unip.
Viale dei Lanifici, 18 | 36078 Valdagno (Vicenza) | Italy
R.E.A. 313015/Vi – C.F. e reg. imp. Vicenza P.IVA03282400245 – c.s. €120.000 i.v.
Tel. +39 0445.425500 – Fax +39 0445.425533 | www.fenice.care – info@fenice.care
