Description
Some leather shows very high levels of dye emerging from beneath the finishing. It’s usually enough to use Deep Cleaner F to remove all unwanted dye, but sometimes the dye can resurface. If a color coat is applied over a dye migration, it’s highly likely that the dye will return to the surface.
Dye Transfer Blocker is a solvent-based product that is to be used before applying a color coat (HCC). It’s designed to be applied in the areas that present heavy stains due to color emergence from beneath the finishing. Dye Transfer Blocker will stop the dye from migrating from inside back to the leather’s surface.
Directions: Clean the surface well using Deep Cleaner F. Once dry, apply Extra Adhesion and dry well. Apply a light, uniform coat of Dye Transfer Blocker onto the area. Complete the refinishing process with High Coverage Colors and Top Coat.
Warning – Flammable liquid and vapour. May cause drowsiness or dizziness. Repeated exposure may cause skin dryness or cracking. Contains: n-butyl acetate. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Read label before use. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use only outdoors or in a well-ventilated area. Wear protective gloves and eye/face protection. In case of fire: Use CO2, foam, dry extinguishers, nebulised water to extinguish. Store in a well-ventilated place. Keep cool. Store locked up. Dispose of contents/container in accordance with applicable regulations.
UFI: F312-X0S4-N006-U5U0
This post is also available in: Italian
