Description

Fast Leather Glue is a flexible, resistant, solvent-based adhesive created to repair slits or cuts in leather and vinyl. The flexible nature of the product matches the natural flexibility of leather.

It’s a viable alternative to Leather Glue WB, particularly where there are slits and/or cuts in leather or vinyl that has become dried out, stiff or squeaky over time.

Directions: Clean the area with Ultra Rapid Leather Cleaner. Leave to dry. Use a spatula or knife to apply Fast Leather Glue directly to the edges of the damaged leather. Join the 2 parts and hold them firmly together. Remove any excess product immediately. Heat with a professional dryer for a few seconds or allow to air dry for a few minutes. When repairing an open cut, a Support Mesh will be needed to hold the cut and keep it from separating in the future.

Package for Professional users. See technical information for use.

Danger – Highly flammable liquid and vapour. Causes skin irritation. Causes serious eye irritation. May cause an allergic skin reaction. May cause drowsiness or dizziness. Toxic to aquatic life with long lasting effects. Contains: Hydrocarbons, C6-C7, isoalkanes, cyclics, <5% n-hexane; Hydrocarbons, C6, isoalkanes, <5% n-hexane; Polymer of Phenol, Formaldehyde and t-Bu-phenol; rosin, colophony. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Read label before use. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use only outdoors or in a well-ventilated area. Avoid release to the environment. Wear protective gloves and eye protection. In case of fire: Use CO2, foam, dry extinguishers, nebulised water to extinguish. Store in a well-ventilated place. Keep cool. Store locked up. Dispose of contents/container in accordance with applicable regulations. Do not swallow. Wash hands after use.

UFI: 48C0-70VC-N008-AYV1

This post is also available in: Italian