Description

Reconstruction of leather surface and grain in the event of scratches or other superficial damage in pigmented leather.

Directions:

1. Clean the damaged area with Deep Cleaner F, then dry the surface with a blower or professional heat gun.

2. Apply Surface Repair on the damaged spot using a spatula. Use small quantities of product in order to create a fine film.

3. The direction of the first stroke should be opposite the direction in which the damage was created.

4. The direction of the second stroke should be in the same direction in which the damage was created.

5. Dry with a blower or professional heat gun then repeat while applying fine layers until the damaged area is completely filled.

6. Spray the repaired area with High Coverage Color or Touch Up Pigment in the right color.

7. Dry with a blower or professional heat gun and repeat until the repaired area is completely covered with paint.

8. Make a mold of the grain using Grain Copier and heat this mold with a blower until it changes color. Protect your hand from the heat using cloth while heating.

9. Push down firmly on the heated mold for 10-15 seconds in the center of the repaired area with the grain in the proper position.

10. Recolor if necessary and, if you have used High Coverage Color, finish the area with a topcoat.

Precaution for use: Keep out of reach of children. Do not get in eyes or on skin. In case of contact, rinse with plenty of water. Do not swallow. Wash hands after use. EUH208 Contains 1,2-benzisothiazol-3(2H)-one; Reaction mass of isothiazolinones. May produce an allergic reaction. Product containing biocides. Active principle: C(M)IT/MIT (3:1), BIT.

This post is also available in: Italian