A water-based product used on natural leather, such as aniline and pull-up. Do not use on nubuck or suede. Similar to our own skin, the surface of natural leather can be scratched or abraded. Scratch Remover is a simple solution for healing and blending surface scratches or rubs on natural leather. It helps to restore the surface color as well as to blend the damage. It’s highly effective on fingernail scratches in aniline leather. For some leather, Pull-Up Revive may be the best solution.
Pre-Test: Apply Scratch Remover by cloth on a discrete area. It’s normal for Scratch Remover to transfer some color to the cloth while moving and blending color over the scratch. However, the color transfer may be too dramatic on very sensitive leather. Therefore, check the tested area for both darkening and lightening of the color. If you are not satisfied with the result when the product is dry, discontinue use and contact a specialist.
Directions: Apply Scratch Remover to a lint-free cloth and rub gently into surface scratches or other areas to be restored. Continue until the scratch is blended. Do not rub aggressively! A heat source will improve product activation. After the repair is completely dry, protect the leather with Leather Protector.