Description

Plastic Primer S is a solvent-based adhesion promoter designed for the plastic parts of car interiors. It’s an effective product used as a primer before renovating plastic parts, due to its incredible adhesion, quick drying time, and maximum transparency.

Directions: The product is ready to use. Plastic Primer S can be used by spray gun or by dabbing with a sponge directly onto the plastic. In this way, you minimize the quantity of product used and work without any waste. Spray one abundant, uniform coat and then dry using a professional heat gun.

Package for Professional users. See technical information for use.

Danger – Highly flammable liquid and vapour. Causes skin irritation. Causes serious eye damage. May cause drowsiness or dizziness. May be fatal if swallowed and enters airways. Toxic to aquatic life with long lasting effects. Contains: Hydrocarbons, C6, isoalkanes, <5% n-hexane; Glycidoxypropyltrimethoxysilane. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Read label before use. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use only outdoors or in a well-ventilated area. Wear protective gloves and eye protection. IF SWALLOWED: Immediately call a POISON CENTER or a doctor. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or a doctor. Do NOT induce vomiting. In case of fire: Use CO2, foam, dry extinguishers, nebulised water to extinguish. Store in a well-ventilated place. Keep cool. Store locked up. Dispose of contents/container in accordance with applicable regulations. Do not swallow. Wash hands after use.

UFI: 4X00-H01Q-V00W-X0X9

This post is also available in: Italian