Description
It’s also effective at removing dirt and water-based or grease stains from microfiber. It will also remove fresh ink from most microfibers.
Pre-test: Shake the bottle. Dampen a white cloth with the product and lightly rub on a hidden area. Check the result after drying to ensure you’re satisfied with the result.
Directions: Vacuum clean the microfiber. For general cleaning, dampen the microfiber cloth with water and then with a few drops of product. Wrap the cloth around the sponge, and brush the microfiber to absorb dust. For spot removal, try to remove as much of the stain from the microfiber as possible with a non-abrasive cloth. Try to lift the stain without pushing it into the microfiber. Wet the sponge with Microfiber Cleaner, squeeze it out, then gently rub. Remove excess product with a damp cloth. Repeat for heavily soiled areas. Allow to dry naturally. When dry, lightly brush it with a dry sponge to revive fibers.
Precaution for use: Keep out of reach of children. Do not get in eyes or on skin. In case of contact, rinse with plenty of water. Do not swallow. Wash hands after use. EUH208 Contains reaction mass of isothiazolinones. May produce an allergic reaction. Contains (Regulation (EC) No 648/2004): less than 5% non-ionic surfactants. Preservatives: Methylchloroisothiazolinone, Methylisothiazolinone, Bronopol. Perfumes. Product containing biocides. Active principle: C(M)IT/MIT (3:1).
UFI: F251-H0C3-5009-GN8P
INCI: available on fenice.it
This post is also available in: Italian











