Description

Extra Adhesion is a highly e cient solvent-based primer used mainly in refinishing automotive interiors to improve adhesion when a high degree of e ciency and durability is required. Extra Adhesion is ready to use (without additional crosslinker).

Directions: Apply by sponge in difficult areas and then apply by spray gun. You can accelerate drying with a professional heat gun.

Package for Professional users. See technical information for use.

Warning – Flammable liquid and vapour. May cause drowsiness or dizziness. Contains: 1-methoxy-2-propanol; n-butyl acetate. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Read label before use. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use only outdoors or in a well-ventilated area. In case of fire: Use CO2, foam, dry extinguishers, nebulised water to extinguish. Store in a well-ventilated place. Keep cool. Store locked up. Dispose of contents/container in accordance with applicable regulations. Do not get in eyes or on skin. In case of contact, rinse with plenty of water. Do not swallow. Wash hands after use. Do not use in paint spraying equipment. Repeated exposure may cause skin dryness or cracking. EUH208 Contains Reaction mass of isothiazolinones. May produce an allergic reaction.
Product containing biocides. Active principle: C(M)IT/MIT (3:1).

UFI: CJD0-U07A-700Q-73M0

This post is also available in: Italian