Cleaning car
upholstery

Find out how to clean your car’s seats and keep them looking great.

All the necessary to clean and protect
your leather car interior!

MAXI CAR LEATHER CARE KIT contains all you need to give your car interior 3 complete cleaning and protection cycles. Comes with a handy ink and chocolate stain remover.

BUY

All the necessary to clean and protect
your leather car interior!

MAXI CAR LEATHER CARE KIT contains all you need to give your car interior 3 complete cleaning and protection cycles. Comes with a handy ink and chocolate stain remover.

BUY

Cleaning car upholstery

Read about the steps to be taken,
follow the advice of Fenice experts, and find out which products to use.

BUY ALL PRODUCTS

Buy all products, you will get a 10% discount and a free soft cloth!

  1. Clean with our Leather Cleaner and the white side of our dual-action sponge. Eliminate any residual dirt with water using the blue side of the dual-action sponge.
  2. Apply our powdered degreaser only on the greasy area. Let rest for at least four hours.
  3. Vacuum up the powder, then remove any remaining residue with a dry sponge. If the grease is not completely removed, repeat step 2.
  4. Clean again with our Leather Cleaner and the blue side of our dual-action sponge.
  5. Apply Car Leather Protector and dry.

BUY THE KIT

  1. Apply the Ink Remover in circular motions to the stain and wait about 30 seconds.
  2. When the stain starts to break up, wipe away both the Ink Remover and the stain using a soft, white cloth.
  3. Clean with Leather Cleaner and the Dual-Action Sponge. If the stain has not been fully removed, repeat steps 1 and 2 once without rubbing too hard. Ink can be removed when acting within a few hours. Otherwise, do what you can to minimize the stain, then call for expert intervention.
  4. Rinse with water and dry.
  5. Apply Car Leather Protector with a soft, white cloth and let dry.
BUY ALL PRODUCTS

Buy all products, you will get a 10% discount and a free soft cloth!

  1. Clean with our Leather Cleaner and the white side of our dual-action sponge. Eliminate any residual dirt with water using the blue side of the dual-action sponge.
  2. Apply Mold Remover to a cloth and delicately rub the area to be treated.
  3. Repeat after 24 hours if necessary.
  4. Clean again using Leather Cleaner and the blue side of the dual-action sponge to remove any residue of Mold Remover.
  5. Apply Car Leather Protector with a cloth and rub lightly in circular motions.
  6. Let dry, then lightly buff if desired.
BUY ALL PRODUCTS

Buy all products, you will get a 10% discount and a free soft cloth!

  1. Clean the leather with our Leather Cleaner and the white side of our dual-action sponge. Eliminate any residual dirt with water using the blue side of the dual-action sponge.
  2. Let air dry
  3. Apply Anti-Squeak
  4. Let air dry
BUY ALL PRODUCTS

Buy all products, you will get a 10% discount and a free soft cloth!

  1. Clean the leather with our Leather Cleaner and the white side of our dual-action sponge. Eliminate any residual dirt with water using the blue side of the dual-action sponge.
  2. Let air dry
  3. Apply Leather Revive
  4. Let air dry and buff with a cloth if desired
BUY THE KIT

  1. Clean the leather with our Leather Cleaner and the white side of our dual-action sponge. Eliminate any residual dirt with water using the blue side of the dual-action sponge. Dry.
  2. Apply Car Leather Protector and dry
BUY ALL PRODUCTS

Buy all products, you will get a 10% discount and a free soft cloth!

  1. Apply our Dye Transfer Stain Remover to a soft, non-abrasive cloth, then press lightly on the area to be cleaned. Repeat as necessary. Do not rub too aggressively. If the stain does not come away easily, call for expert intervention.
  2. Clean the leather with our Leather Cleaner and the white side of our dual-action sponge. Eliminate any residual dirt with water using the blue side of the dual-action sponge. Dry.
  3. Apply Car Leather Protector and dry.

Cleaning car upholstery

Read about the steps to be taken,
follow the advice of Fenice experts, and find out which products to use.

BUY ALL PRODUCTS

Buy all products, you will get a 10% discount and a free soft cloth!

  1. Clean with our Leather Cleaner and the white side of our dual-action sponge. Eliminate any residual dirt with water using the blue side of the dual-action sponge.
  2. Apply our powdered degreaser only on the greasy area. Let rest for at least four hours.
  3. Vacuum up the powder, then remove any remaining residue with a dry sponge. If the grease is not completely removed, repeat step 2.
  4. Clean again with our Leather Cleaner and the blue side of our dual-action sponge.
  5. Apply Car Leather Protector and dry.

BUY THE KIT

  1. Apply the Ink Remover in circular motions to the stain and wait about 30 seconds.
  2. When the stain starts to break up, wipe away both the Ink Remover and the stain using a soft, white cloth.
  3. Clean with Leather Cleaner and the Dual-Action Sponge. If the stain has not been fully removed, repeat steps 1 and 2 once without rubbing too hard. Ink can be removed when acting within a few hours. Otherwise, do what you can to minimize the stain, then call for expert intervention.
  4. Rinse with water and dry.
  5. Apply Car Leather Protector with a soft, white cloth and let dry.
BUY ALL PRODUCTS

Buy all products, you will get a 10% discount and a free soft cloth!

  1. Clean with our Leather Cleaner and the white side of our dual-action sponge. Eliminate any residual dirt with water using the blue side of the dual-action sponge.
  2. Apply Mold Remover to a cloth and delicately rub the area to be treated.
  3. Repeat after 24 hours if necessary.
  4. Clean again using Leather Cleaner and the blue side of the dual-action sponge to remove any residue of Mold Remover.
  5. Apply Car Leather Protector with a cloth and rub lightly in circular motions.
  6. Let dry, then lightly buff if desired.
BUY ALL PRODUCTS

Buy all products, you will get a 10% discount and a free soft cloth!

  1. Clean the leather with our Leather Cleaner and the white side of our dual-action sponge. Eliminate any residual dirt with water using the blue side of the dual-action sponge.
  2. Let air dry
  3. Apply Anti-Squeak
  4. Let air dry
BUY ALL PRODUCTS

Buy all products, you will get a 10% discount and a free soft cloth!

  1. Clean the leather with our Leather Cleaner and the white side of our dual-action sponge. Eliminate any residual dirt with water using the blue side of the dual-action sponge.
  2. Let air dry
  3. Apply Leather Revive
  4. Let air dry and buff with a cloth if desired
BUY THE KIT

  1. Clean the leather with our Leather Cleaner and the white side of our dual-action sponge. Eliminate any residual dirt with water using the blue side of the dual-action sponge. Dry.
  2. Apply Car Leather Protector and dry
BUY ALL PRODUCTS

Buy all products, you will get a 10% discount and a free soft cloth!

  1. Apply our Dye Transfer Stain Remover to a soft, non-abrasive cloth, then press lightly on the area to be cleaned. Repeat as necessary. Do not rub too aggressively. If the stain does not come away easily, call for expert intervention.
  2. Clean the leather with our Leather Cleaner and the white side of our dual-action sponge. Eliminate any residual dirt with water using the blue side of the dual-action sponge. Dry.
  3. Apply Car Leather Protector and dry.

Contact us

For whatever you may need, simply send an email to info@fenice.care
or use the form below

    Contact us

    For whatever you may need, simply send an email to info@fenice.care
    or use the form below

      This post is also available in: Italian