Description

This is a do-it-yourself kit to repair worn steering wheels.
It contains everything needed to restore steering wheels to a like-new condition

Contains:

Steering Wheel Power Cleaner 100ml
The product has been designed to remove difficult stains or dirt accumulated over time on the surface of the leather.
Instructions: Place yourself near a sink or carry a bucket of water to rinse the sponge frequently. Shake the bottle well with the Steering Wheel Power Cleaner. Wet the white part of the sponge with water, then apply the product, and rub the surface until the sponge is dirty. Rinse the sponge well with water and then continue cleaning with the product. It may be necessary to rinse the sponge and repeat the cleaning several times, proceed carefully until all the dirt has been removed. The sponge wears out during use, as it releases microparticles that remove dirt in depth.
Once all the dirt has been removed, rinse the steering wheel using a microfiber glove dampened with water. Rinse the cloth when dirty and insist until the cloth remains clean. Dry with a heat source.
Warning – Causes serious eye irritation. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Read label before use. Wash hands thoroughly after handling. Wear protective gloves and eye protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Dispose of contents/container in accordance with applicable regulations. Do not swallow. Contains (Regulation (EC) No 648/2004): less than 5% anionic surfactants. Preservatives: Chlorocresol, Methylchloroisothiazolinone, Methylisothiazolinone. Perfumes.
UFI: H3D0-90SA-Q007-XDPP

Steering Wheel Touch-Up Pigment 100ml
Steering Wheel Color represents the easiest and most effective solution to recolor leather steering wheels. It’s a ready-to-use product.
Instructions: After wearing gloves, shake well the applicator of Steering Wheel Color and press the sponge against the steering wheel until the inner seal breaks. Gently squeeze the bottle to get the product out. Proceed with the application, trying to avoid excesses of product or streaks, possibly dabbing the surface of the steering wheel to be recolored. Dry well with a heat source. Repeat several applications/drying treatments until satisfactory coverage and color uniformity are achieved. It’s always preferable to make more applications of light layers rather than applying a heavy layer. It’s recommended to dry each layer well with a heat source and once properly colored proceed with the
Steering Wheel Sealer, which must be applied as soon as the drying is completed.
Precaution for use: Keep out of reach of children. Do not get in eyes or on skin. In case of contact, rinse with plenty of water. Do not swallow. Wash hands after use. EUH208 Contains chlorocresol; 1,2-benzisothiazol-3(2H)-one; Reaction mass of isothiazolinones. May produce an allergic reaction. Product containing biocides. Active principle: C(M)IT/MIT (3:1).

Steering Wheel Sealer 90ml
A transparent top coat that guarantees high durability and resistance against dirt and rubbing, it gives a matte finish and a silky touch feeling.
Instructions: Open the packaging of the Activator, pour it inside the packaging of the Steering Wheel Sealer, mix and shake vigorously for at least a minute. The product can be applied evenly with the microfiber cloth taking care not to make streaks, or it can be applied using the blue side of the Dual Action Sponge as a pad. It’s important to make at least three/four applications for a more uniform steering wheel protection and longer durability. Dry well with a heat source.
Precaution for use: Keep out of reach of children. Do not get in eyes or on skin. In case of contact, rinse with plenty of water. Do not swallow. Wash hands after use. EUH208 Contains 1,2-benzisothiazol-3(2H)-one; 2-methyl-2H-isothiazol-3-one; Reaction mass of isothiazolinones. May produce an allergic reaction. Product containing biocides. Active principle: C(M)IT/MIT (3:1).

Activator IC 10ml
The Activator is a water-based product that must be mixed with the Steering Wheel Sealer, it guarantees high elasticity and high durability standards. Furthermore, it increases the adhesion and the resistance to both wet and dry rubbing.
Important note: The mixture containing the Activator must be used within 8 hours.
Warning – Harmful if inhaled. May cause an allergic skin reaction. May cause respiratory irritation. Harmful to aquatic life with long lasting effects. Contains: HDI Polyisocyanate. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Read carefully and follow all instructions. Avoid breathing vapours/spray. Wash hands thoroughly after handling. Use only outdoors or in a well-ventilated area. Wear protective gloves and eye protection. Store locked up. Dispose of contents/container in accordance with applicable regulations. Do not swallow. EUH208 Contains hexamethylene-di-isocyanate. May produce an allergic reaction.
UFI: T520-K0Q9-500T-6T36

Dual-Action Sponge
Dual Action Sponge consists of 2 joined sponges. The colored side is used for routine
cleaning, whereas the white side is used for stain removal or eliminating ingrained dirt on small areas. It is compatible with all of FENICE’s water-based cleaners.

Microfiber Cloth
Easy to wear during the rinsing phase, the Microfiber Glove is washable, shrink-resistant, and durable, allowing for multiple uses. It also maintains its soft, luxurious feel.

800 Sand Paper
Abrasive sand paper on sponge is essential to make the surface of the steering wheel smoother, and allows a better adhesion of the products.
Instructions.

Steering Wheel is available in the following colors:

• Black
• Beige 
• Medium Grey 
• Dark Grey
• Medium Brown 
• Dark Brown 

This post is also available in: Italian