Description

Crosslinker IC is an innovative and powerful crosslinking product. It has to be used along with water- based Top Coats and Adhesion Promoters to improve the finishing performance.

Direction for use: Mix Crosslinker IC in a ratio of 4-6% on the total weight of the Top Coat or Adhesion Promoter used.

Notes: Crosslinker IC is a concentrated product that needs precise guidelines for correct use. Pre-dilute the Crosslinker in a ratio of 1:1 in weight with water and mix well for about 20 seconds. Pour the diluted Crosslinker into the product to be crosslinked (do not work the opposite way). During this operation, it is essential to keep stirring for about 1 minute to guarantee the homogeneity of the mixture. Use the crosslinked mixture within 8 hours.

Warning – Harmful if inhaled. May cause an allergic skin reaction. May cause respiratory irritation. Harmful to aquatic life with long lasting effects. Contains: HDI Polyisocyanate. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Read carefully and follow all instructions. Avoid breathing vapours/spray. Wash hands thoroughly after handling. Use only outdoors or in a well-ventilated area. Wear protective gloves and eye protection. Store locked up. Dispose of contents/container in accordance with applicable regulations. Do not swallow. EUH208 Contains hexamethylene-di-isocyanate. May produce an allergic reaction.

UFI: T520-K0Q9-500T-6T36

This post is also available in: Italian